|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
This is an updated version of the tips without the part that covers the nail bed, resulting in extensions that look thin and natural.
These tips are a great alternative to paper and upper forms, allowing you to model a perfect shape even on complex nail types.
BENEFITS:
• Flexible contact zone
• Strong at the free edge
• Natural arch
• 12 different sizes
• Easily removed by filing or soaking
• No bulky edges
• Extensions in just a few minutes
APPLICATION FEATURES
How to Use:
1. Prepare the natural nail plate as you would for extension.
2. Apply a thin layer of base gel.
3. Fit the tip so that it aligns as a natural extension from the nail’s growth points.
4. If needed, slightly trim the edge of the contact zone for a closer fit.
5. Apply Gem Gel or Rubber Base to the contact area of the tip.
6. Position the tip at a 45° angle and gently press down to secure it to the free edge.
7. Flash cure with a handheld lamp.
8. Cure in a 48W LED lamp for a full cycle - 60 seconds.
9. Trim the excess tip's length with a tip cutter.
10. File the transition area at the tip’s attachment zone.
11. Apply a thin layer of base gel over the entire nail and tip.
12. Apply the gel.
13. File the final shape.
14. Finish with a top coat.
Important:
If additional pinching of a nail arch is needed, thin out the tip using a nail drill bit to make it softer and more flexible.
For better adhesion of the material, be sure to cover the tip with a thin layer of base.